SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - Inevitably, forklift parts would eventually wear out and need replacing. The choice of obtaining brand new components can become costly so one more idea is to buy used parts. This could save much money eventually. It is a good idea to obtain used forklift components that have been reproduced. These parts will ensure that you are getting parts that would work for a long time and be productive.
Remanufacturing worn out or broken components is a less expensive method in general than rebuilding. With rebuilding components, only the components that are worn out or broken get replaced, which means that other wearable parts might break down soon after acquisition.
Remanufactured parts are cleaned after being taken apart and have the unusable parts replaced. This method can offer the best guarantee for used parts. All wearable components are replaced regardless of age or wear which is one more rationale why remanufactured parts overall run so much better. Whatever component within the part is new and this provides far longer life to the used part. Based on the lift truck components that are being redone, the cleaning process and the complete remanufacturing process will differ.
The engines are cleaned after a complete disassembly. Several engine components like spark plugs, pistons, rings, valves, valve springs, and filters can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A thorough inspection is done to be able to check for any cracks. Seals, bearings and bushings are all replaced. Typically, the replacement parts utilized on transmission parts meet OEM specifications.
A few lift truck components like for instance the water pump, torque converters, the alternator, the starter and steer axles could be quite serviceable after worn components are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can also be remanufactured with replacing all aged and worn out parts. Unlike several lift truck components the control card can only have the worn and aged parts replaced.
Remanufactured components are comprehensively inspected upon reassembly to ensure they are in top condition previous to being sold. It is essential when purchasing reproduced parts to make certain they have undergone the proper testing and inspection procedures. On certain bigger parts like steer axles, engines and transmissions, OEM specification replacement components must be used.
The forklift dealer could ensure that the components they have reproduced meet the OEM specifications. This would also guarantee the components meet industry standards. A lot of details go into remanufacturing used components. This attention to detail offers more serviceability out of remanufactured parts compared to the components that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Lethbridge, Alberta
forkliftpartslethbridge.ca
Email Us
About Us