SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Gradall Forklift Part
Gradall Forklift Parts - The Gradall excavator was the brainchild of two brothers Koop and ray Ferwerda. The excavator was established In the 1940's through WWII, when there was a shortage of workers. The brothers faced the problems of a depleted labor force due to the war. As partners in their Cleveland, Ohio construction company referred to as Ferwerda-Werba-Ferwerda they lacked the existing laborers to carry out the delicate work of finishing and grading on their interstate projects. The Ferwerda brothers opted to make a machine which will save their business by making the slope grading task less manual, easier and more efficient.
The very first excavator prototype consisted of a machine with two industrial beams on a rotating platform fixed to a used truck. There was a telescopic cylinder which was used to move the beams backward and forward. This enabled the fixed blade at the far end of the beams to push or pull the dirt. Shortly improving the first design, the brothers made a triangular boom to add more strength. Also, they added a tilt cylinder which let the boom rotate 45 degrees in both directions. A cylinder was positioned at the rear of the boom, powering a long push rod to allow the machine to be outfitted with either a bucket or a blade attachment.
The year 1992 marked a momentous year for Gradall with their launch of XL Series hydraulics, the most remarkable change in the company's excavators ever since their invention. These top-of-the-line hydraulics systems allowed Gradall excavators to deliver comparable power and high productivity on a realistic level to conventional excavators. The XL Series ended the first Gradall equipment power drawn from low pressure hydraulics and gear pumps. These traditional systems efficiently handled grading and finishing work but had a difficult time competing for high productivity tasks.
Gradall's new XL Series excavators showed more ability to lift and dig materials. With this series, the models were produced together with a piston pump, high-pressure system of hydraulics which showed marked improvement in boom and bucket breakout forces. The XL Series hydraulics system was likewise developed together with a load-sensing capability. Conventional excavators use an operator to be able to pick a working-mode; where the Gradall system can automatically adjust the hydraulic power intended for the job at hand. This makes the operator's whole task easier and likewise conserves fuel simultaneously.
As soon as the new XL Series hydraulics became available in the market, Gradall was thrust into the vastly competitive industrial equipment market which are meant to tackle excavating, demolition, pavement removal and different industrial tasks. The introduction of the new telescoping boom helped to further enhance the excavator's marketability. The telescoping boom gives the excavator the ability to better position attachments and to work in low overhead areas.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Lethbridge, Alberta
forkliftpartslethbridge.ca
Email Us
About Us