SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jib - Forklift jibs enable the operator to reach over obstacles so as to place their heavy loads on decks, roofs or even elevated platforms. They're usually utilized to reach through second and third story doorways or even windows in order to lift and move heaps to areas still under construction. Fork truck jibs are really utilized to unload trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are even typically used for reaching over scaffolding meant for masonry work.
Each and every jib boom forklift attachment consists of two rotating hooks. One hook could be manually fitted to whichever area on the boom's bottom and the second hook is fixed at the end of the jib. This permits the person operating it to carry any load which has two hook points. Depending on the dimensions of the model, each and every hook is rated at either four thousand or six thousand pounds It's possible to make use of either a hook or even both to lift a load. The operator must make certain that the total weight of the jib and the load doesn't go beyond the rated capacity of the jib as shown on the load chart for that retracted or extended position.
Jib attachments are made to be used on industrial forklifts, extendable-reach lift trucks, or even on rough terrain straight-mast lift trucks. Forklift jib cranes install onto the forklift by means of inserting both forks into the fork pockets. The back of the jib crane then seats towards the rear of the fork and a safety chain wraps the forklift carriage to hold it into place.
Jib Boom Forklift Attachment Load Capacity
The load capacity of a lift truck jib has a most of about 1935 pounds up to 6000 lbs on either the extended or retracted positions range. You may want to discuss with a material handling specialist concerning the particular restrictions of your forklift use. The load capacity rankings are intended for the jib itself and not the forklift or even the maximum load that can be carried securely making use of a certain lift truck. It is important to bear in mind that each time whichever attachments like for instance a forklift jib are connected to the lift truck, the new center of gravity made by the attachment will lessen the overall lift capability of the forklift. There are instructions available which provide details on the way to properly gauge these load limits.
Safe Usage of your Fork Lift Attachment & Fork Trucks
Prior to making use of a forklift jib, ensure that it is properly secured to the forklift using hooks and shackles. Continuously double check to verify that the screw pins are tight. It is vital to even make sure that the freight calculations have been made correctly. Remember to consider the fact that rated capacities at times decrease whenever the boom is in a raised position, every time the boom is fully extended with telehandlers or even whenever the mast is slanted forward.
Some significant suggestions concerning the modifiable jib are: never pull a load with a forklift jib accessory, in view of the fact that these kinds of accessories are actually designed for vertical lift only. All the time pick up the load without letting it move back and forth. Utilize extreme caution every time a load is carried to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Lethbridge, Alberta
forkliftpartslethbridge.ca
Email Us
About Us